loading
The thickness of titanium foil used for speakers can vary depending on the specific application and design of the speaker. Titanium is often used in speaker diaphragms or tweeters due to its high strength-to-weight ratio and excellent stiffness.
In general, the thickness of titanium foil used for speaker diaphragms can range from around 10 to 50 micrometers (µm). Thinner foils, such as those around 10 to 20 µm, are commonly used for tweeters where high-frequency response and fast transient response are crucial. Thicker foils, such as those around 30 to 50 µm, may be used for larger diaphragms that require more rigidity and lower resonant frequencies.
It's important to note that the specific thickness of titanium foil used in speakers can vary depending on the design preferences of the speaker manufacturer, the desired performance characteristics, and the intended application of the speaker. Therefore, it's recommended to consult the specifications provided by the speaker manufacturer or contact them directly for accurate information on the titanium foil thickness used in their specific speaker models.
| Name | Titanium Strip andFoil,Tape | Dlivery Status |
| According to your requirements or sheet Hot rolling cold rolling coil rolling-annealing cold rolling-annealing smooth according to your Hardness Requirements | ||
| Standard | GB/T3621.ASTM B265 | |
| Certification | IOS9001:2015,ISO/TS 16949:2009 | |
| Wall thickness | 0.08-3.0mm | |
| Allowable width Deviation | +/-0.15 mm | |
| Material | Gr1(TA1),Gr2(TA2),Gr12(TA10) | |
| Delivery time | Within 25 days after receiving deposit | |
| Payment term | T/T,L/C | |
| Supply ability | 250 tons per month | |
| Packing | Export standard package with polywood pallet or ISPM 15 stamped wooden case | |
| Information | Max coil weight:10000KG Coil inner Diameter Φ500/600/610/762 The Narrowest slitting slip width:15mm Max Length:5600M |
牌号 Grade | 厚度 Thickness（mm） | 厚度允许偏差 Allowable Thickness Deviation(mm) | 材料宽度 Width（mm） | 允许宽度偏差 Allowable width Deviation(mm) | |
普通精度 General precision | 高精度 High Precision | ||||
TA1/GR1 TA4/GR4 TA2/GR2 TC4/GR5 TA10/GR12 | 0.01<T≤0.1 | +/-0.01 | +/-0.005 | 5～1200 | +/-0.1 |
0.1<T≤0.6 | +/-0.01 | +/-0.005 | |||
0.6<T≤1.0 | +/-0.01 | +/-0.005 | |||
+/-0.02 | +/-0.01 | ||||
1.0<T≤2.0 | |||||
牌号 Grade | 状态 Status | 室温力学性能 Room-Temperature Mechanical Properties | |||
抗拉强度Rm/Mpa Tensile Strength Rm/Mpa | 规定非比例延伸强度Rp0.2/Mpa Provisions of Non-proportional Extension Intensity Rp0.2/Mpa | 断后伸长率A50 mm/% Precentage Elongation after Fracture | |||
TA1/GR1 | 退火态 Annealed | ≥240 | 140～310 | ≥24% | |
TA2/GR2 | ≥400 | 275～450 | ≥20% | ||
TA10/GR12 | ≥460 | ≥300 | ≥18% | ||
