loading
Titanium Grade 1, also known as Commercially Pure (CP) Grade 1, is a commercially pure titanium alloy that contains a minimum of 99.5% titanium. It is the most ductile and softest among all grades of titanium, offering excellent corrosion resistance in various environments. Here are some key features and applications of Titanium Grade 1:
Corrosion Resistance: Grade 1 titanium exhibits exceptional corrosion resistance, especially in environments such as seawater, wet chlorine, and dilute acids. It is resistant to general corrosion, pitting, and crevice corrosion.
Ductility and Formability: Grade 1 titanium is highly ductile and easily formable. It can be cold-formed, rolled, and shaped into various products, making it suitable for applications that require complex shapes or forming processes.
Lightweight: Titanium Grade 1 has a low density, approximately 60% of steel, making it lightweight. This property is advantageous in applications where weight reduction is desired, such as aerospace components or sports equipment.
Biocompatibility: Grade 1 titanium is biocompatible and non-toxic, making it suitable for medical and dental applications. It is commonly used in implants, surgical instruments, and dental prosthetics.
Heat Resistance: Titanium Grade 1 can withstand high temperatures without significant deformation or loss of mechanical properties. It retains its strength and corrosion resistance up to approximately 400°C (752°F).
Industrial Applications: Grade 1 titanium is used in various industrial applications, including chemical processing equipment, heat exchangers, marine components, and architecture. It is also employed in the automotive, electronics, and consumer goods industries.
It is important to note that while Grade 1 titanium offers excellent corrosion resistance and other desirable properties, it has lower strength compared to other titanium alloys. Therefore, it may not be suitable for applications that require high strength or elevated temperature performance.
牌号 Grade | 厚度 Thickness(mm) | 厚度允许偏差 Allowable Thickness Deviation(mm) | 材料宽度 Width(mm) | 允许宽度偏差 Allowable width Deviation(mm) | |
普通精度 General precision | 高精度 High Precision | ||||
TA1/GR1 TA4/GR4 TA2/GR2 TC4/GR5 TA10/GR12 | 0.01<T≤0.1 | +/-0.01 | +/-0.005 | 5~1200 | +/-0.1 |
0.1<T≤0.6 | +/-0.01 | +/-0.005 | |||
0.6<T≤1.0 | +/-0.01 | +/-0.005 | |||
+/-0.02 | +/-0.01 | ||||
1.0<T≤2.0 |