loading
Main applications include small evaporators, spiral heat exchangers, titanium chopstick manufacturing, titanium straw manufacturing, etc. The wall thickness is generally 0.4, 0.5, 0.6 mm, and can be customized with coil tubes and wall thicknesses
| Name | titanium tube |
| Model NO. | 17 |
| Tickness Tolerance | +/-0.02mm |
| Length | According to Your Own Requirements |
| Material | Gr1 Gr2 Gr12 |
| Heat Treatment | Bright Annealing |
| Transport Package | Wooden Case |
| Specification | Diameter6-89mm |
| Trademark | shengpo |
| Origin | China |
| HS Code | 8108904090 |
| Production Capacity | 500tons Per Month |
| Name | Titanium coil tube | |
| Standard | GB/T3625,ASTM B338,ASTM B862 ASME SB338 | |
| Certification | IOS9001:2015,ISO/TS 16949:2009 | |
| Outer diameter | 6mm - 89mm | Length ≤25000mm According to your requirements or coild tube |
| Wall thickness | 0.3-3mm | |
| Material | Gr1(TA1),Gr2(TA2),Gr12(TA10) | |
| Delivery time | Within 25 days after receiving deposit | |
| Payment term | T/T,L/C | |
| Supply ability | 500 tons per month | |
| Packing | Export standard package with polywood case or ISPM 15 stamped wooden case | |
| Information | Beside the normal executive syandard.we could also make the tubes according to your own requirements,such as wall thickness tolerance,hardness,surface requirements and etc.by different technical requirements and production technology,try our best to satisfied your. |
The structure of a tubular heat exchanger is relatively simple, compact, and inexpensive, but the outside of the tube cannot be mechanically cleaned. This type of heat exchanger tube bundle is connected to a tube plate, which is welded to both ends of the shell and connected to a top cover. The top cover and the shell are equipped with fluid inlet and outlet nozzles. Usually, a series of baffles perpendicular to the tube bundle are installed outside the tube. At the same time, the connection between the tube and the tube plate and the shell is rigid, while the inside and outside of the tube are two fluids of different temperatures. Therefore, when the humidity difference between the tube wall and the shell wall is large, due to the different thermal expansion between the two, a large temperature difference stress is generated, which is not suitable for use when the temperature difference is too large.
The characteristics of the U-shaped heat exchanger: The tube bundle can freely expand and expand, without generating thermal stress due to the temperature difference between the tubes and shells. The thermal compensation performance is good, and the tube pass is a dual tube pass process with a longer flow rate and strong heat transfer performance. The tube bundle can be extracted from the shell, which is easy to clean and has a simple structure, low cost, and is widely used.
