loading
The requirements for titanium coils used in titanium welded tubes can vary depending on the specific application and industry standards. However, some general requirements for titanium coils used in titanium welded tubes include:
Material Grade: The titanium coils should be made from a suitable grade of titanium alloy, such as Grade 2 (ASTM B265) or Grade 5 (ASTM B348), depending on the specific application requirements.
Chemical Composition: The titanium alloy used in the coils should meet the specified chemical composition requirements, including the percentages of titanium and other alloying elements. This ensures the desired mechanical and corrosion-resistant properties.
Mechanical Properties: The titanium coils should possess the required mechanical properties, such as tensile strength, yield strength, and elongation. These properties ensure the coils can withstand the stresses and strains during the welding and subsequent use of the titanium welded tubes.
Dimensions and Tolerances: The coils should meet the specified dimensions and tolerances, including coil width, outer diameter, inner diameter, and coil weight. These dimensions should be suitable for the specific tube manufacturing process and equipment.
Surface Condition: The surface of the titanium coils should be clean, free from contaminants, and free from defects that could impact the quality of the welded tubes. Any surface treatments or coatings, if required, should also be specified.
Testing and Certification: The coils should undergo various tests, such as chemical analysis, mechanical testing, and non-destructive testing, to ensure they meet the specified requirements. The coils should be accompanied by appropriate certifications and documentation to verify their compliance with industry standards.
It is important to note that the specific requirements for titanium coils used in titanium welded tubes may vary based on the application, industry standards, and customer specifications. Therefore, it is recommended to consult the relevant standards and specifications, as well as work with experienced manufacturers or suppliers, to ensure the coils meet the specific requirements of the intended application.
| Name | Titanium Strip andFoil,Tape | Dlivery Status |
| According to your requirements or sheet Hot rolling cold rolling coil rolling-annealing cold rolling-annealing smooth according to your Hardness Requirements | ||
| Standard | GB/T3621.ASTM B265 | |
| Certification | IOS9001:2015,ISO/TS 16949:2009 | |
| Wall thickness | 0.08-3.0mm | |
| Allowable width Deviation | +/-0.15 mm | |
| Material | Gr1(TA1),Gr2(TA2),Gr12(TA10) | |
| Delivery time | Within 25 days after receiving deposit | |
| Payment term | T/T,L/C | |
| Supply ability | 250 tons per month | |
| Packing | Export standard package with polywood pallet or ISPM 15 stamped wooden case | |
| Information | Max coil weight:10000KG Coil inner Diameter Φ500/600/610/762 The Narrowest slitting slip width:15mm Max Length:5600M |
牌号 Grade | 厚度 Thickness（mm） | 厚度允许偏差 Allowable Thickness Deviation(mm) | 材料宽度 Width（mm） | 允许宽度偏差 Allowable width Deviation(mm) | |
普通精度 General precision | 高精度 High Precision | ||||
TA1/GR1 TA4/GR4 TA2/GR2 TC4/GR5 TA10/GR12 | 0.01<T≤0.1 | +/-0.01 | +/-0.005 | 5～1200 | +/-0.1 |
0.1<T≤0.6 | +/-0.01 | +/-0.005 | |||
0.6<T≤1.0 | +/-0.01 | +/-0.005 | |||
+/-0.02 | +/-0.01 | ||||
1.0<T≤2.0 | |||||
牌号 Grade | 状态 Status | 室温力学性能 Room-Temperature Mechanical Properties | |||
抗拉强度Rm/Mpa Tensile Strength Rm/Mpa | 规定非比例延伸强度Rp0.2/Mpa Provisions of Non-proportional Extension Intensity Rp0.2/Mpa | 断后伸长率A50 mm/% Precentage Elongation after Fracture | |||
TA1/GR1 | 退火态 Annealed | ≥240 | 140～310 | ≥24% | |
TA2/GR2 | ≥400 | 275～450 | ≥20% | ||
TA10/GR12 | ≥460 | ≥300 | ≥18% | ||
